When Follow Me is enabled on the Bosch Climate 5000 remote described here, the remote measures room temperature instead of the indoor unit. After you set a target, its screen shows the actual temperature. Seeing a different number afterward does not, on its own, mean the target was lost.
This behavior is documented in Bosch’s Climate 5000 Series Remote Controller User Manual, BTC 769203314 A, dated August 2026. It covers RG10L5 for wall-mounted units and RG10L4 for one-way and four-way cassettes. Match the remote before using its controls.
Compare the target with the reading
A target is the temperature you ask for. A room reading is what the controller currently measures. Follow Me makes that distinction particularly noticeable because the sensor moves with the remote rather than remaining at the indoor unit.
When discussing uneven comfort, tell the technician where the remote was during operation. A reading taken beside a warm appliance or in direct sunlight describes that spot, not necessarily the area where someone is sitting. Keep it out of direct sunlight and heat, with line of sight to the unit and within the manual’s 25-foot range. A poorly positioned remote can give an unhelpful reading or lose its signal.
Check the mode before looking for the function
Bosch lists Follow Me for AUTO, COOL and HEAT. The advanced-function menu is not identical in every mode, and the manual cautions that available functions vary. If you are using DRY or FAN, do not assume the missing selection proves the remote is defective.
Press MENU until the Follow Me person icon flashes, then OK to activate it. Repeat to cancel. Check for the person icon to determine whether it is active. AP Mode, for an optional gateway, and Sleep are different functions.
Active Clean also has a separate purpose: it stops normal operation while cleaning the heat exchanger. Check the displayed function before treating a pause as a failed cooling request.
What to record when the room still feels wrong
Write down the operating mode, requested target and number displayed after setting it. Note whether Follow Me was enabled and where the remote was placed. Add the full indoor model and a photo of the controller. Those observations let a technician separate a control-setting question from a temperature-sensing or equipment problem.
No wiring changes or service-menu adjustments are needed to gather that information. If the controller differs from the one in this manual, use its own instructions instead of trying button combinations from another model.
For a system that still fails to heat or cool as requested, book diagnosis for your existing Bosch HVAC system. We can check the controls along with the equipment; a changed display reading alone is not a reason to replace either.
Further reading
Need HVAC help in the Bay Area?
We serve 65 cities. Same or next day when we can.
Bay Area · 7am–7pm · 7 days · no overtime charges